vmware-logo-smSymptoms

  • Virtual machine contains an IDE virtual disk as the primary OS bootable disk after conversion from physical source.
  • Virtual machine has an IDE virtual disk but the additional secondary virtual disks are SCSI with an LSI or Bus Logic controller.
  • Virtual machine fails to boot with only a black screen after conversion with possible underscore. The Primary disk is an IDE virtual disk but LSI or Bus Logic was selected during conversion.
  • After conversion using P2V, the virtual machine fails to boot

Resolution

When converting a physical machine to a virtual machine using VMware Converter or vCenter Converter Enterprise, if an adapter type is not selected during the initial customization the resulting virtual machine may contain an IDE disk as the primary OS disk.

You must convert the IDE disk to SCSI to get the best performance. If the primary disk is an IDE virtual disk, the newly converted virtual machine may fail to boot because the guest OS does not support the driver. Second reason for this issue is that in ESX 4.x the default disk type for Windows XP 32bit virtual machine creation is IDE. This default value can be manually changed during the virtual machine creation wizard by selecting the custom option. Windows XP 64bit will still use SCSI by default.

Note: The typical SCSI adapter type for newer versions of Windows and Linux OS guests is the LSI Logic controller type.To convert the IDE disk to SCSI:
  1. Locate the datastore path where the virtual machine resides. For example:/vmfs/volumes/<datastore_name>/<vm_name>/
  2. From the ESX Service Console, open edit the primary disk (.vmdk) in a text editor.
  3. Look for the line:ddb.adapterType = ”ide”
  4. To change the adapter type to LSI Logic change the line to:ddb.adapterType = ”lsilogic”To change the adapter type to Bus Logic change the line to:ddb.adapterType = ”buslogic”
  5. Save the file.
  6. From VMware Infrastructure or vSphere Client
    1. Click Edit Settings for the virtual machine.
    2. Select the IDE virtual disk.
    3. Choose to Remove the Disk from the virtual machine.
    4. Click OK.Caution: Make sure that you do not choose Remove from disk.
  7. From the Edit Settings menu for this virtual machine:
    1. Click AddHard DiskUse Existing Virtual Disk.
    2. Navigate to the location of the disk and select to add it into the virtual machine.
    3. Choose the same controller as in Step 3 as the adapter type. The SCSI ID should read SCSI 0:0.
  8. If a CDROM device exists in the virtual machine it may need to have the IDE channel adjusted from IDE 0:1 to IDE 0:0. If this option is greyed out, remove the CDROM from the virtual machine and add it back. This sets it to IDE 0:0.

Additional Information

In some cases, a primary operating system virtual disk is set up as IDE while the additional virtual disks are set up as LSI or Bus Logic SCSI disks. In this situation, after editing the IDE disk adapter type and removing the disk from the virtual machine in Edit Settings, you must change the SCSI channel for the secondary disks to free up SCSI 0:0 for the main OS disk.
Change the SCSI 0:0 disk to SCSI 0:1, then when you add the primary OS disk back into the virtual machine with the new LSI Logic adapter type, you can select SCSI 0:0 for the disk.
Target virtual machines that were converted to ESX 4.0 or ESXi 4.0 hosts using volume-based cloning fail to start up if they contain IDE disks. For more information, see the VMware vCenter Converter Standalone 4.0.1 Release Notes.

 

Lämna ett svar

Din e-postadress kommer inte publiceras. Obligatoriska fält är märkta *

Denna webbplats använder Akismet för att minska skräppost. Lär dig hur din kommentardata bearbetas.